CCTV TESTER User Manual
18
(5) DHCP server
Click on the DHCP icon to open the DHCP server app. Select the “Start” check box at
the top and make any desired changes to the network settings. Click “Save” to start
assigning dynamic IP addresses for IP cameras and other networked devices. Click the
“Refresh” button to check your Client list.
(6) Trace route
It is used to determine path of the IP packet access target.
Note: Trace route testing results only for reference, for accurate test route tracking, Pls
use professional Ethernet tester.
(7) Link monitor
This app is used to see if an IP address is occupied by other network devices. This will
avoid new address conflicts.
6.3 RJ45 cable TDR test
Connect cable to tester’s LAN port, click icon “
” to enter RJ45 cable TDR test
app.
