![background image](http://html1.mh-extra.com/html/safire/sd6118i-2ptvi/sd6118i-2ptvi_user-manual_3399663034.webp)
User Manual of HD-TVI Speed Dome
28
2.
Choose the task number.
Steps:
(1)
Move the cursor to
TASK NO.
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to select the number of the task which is to be
configured.
(3)
Click
IRIS+
again to confirm the settings and exit the edit mode.
Up to 8 time tasks can be configured.
3.
Set the task status.
Steps:
(1)
Move the cursor to
ENABLE
TASK
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to set the task status to
ON
.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
If the task action and task time have not been configured, you cannot set the status as
ON
.
4.
Configure the task action.
Steps:
(1)
Move the cursor to
TASK ACT
and click the
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the task action from preset 1~8, pattern
1~5, patrol 1~10, pan scan, tilt scan, panoramic scan, day mode, night mode, zero calibrate
and none.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
5.
Set the task time.
Steps:
(1)
Move the cursor to
TASK TIME
and click
IRIS+
to enter edit mode.
(2)
Click the left and right direction buttons to position the cursor to
WEEK
,
START (H-M)
and
END (H-M)
.
(3)
Click the up and down direction buttons to set the start time and end time to run the time
task.
(4)
Click
IRIS+
to confirm the settings and exit.
The weekday can be set to be from
Monday
to
Sunday
or
Whole Week
; the
H
refers to
Hour and the
M
refers to Minute.