![background image](http://html1.mh-extra.com/html/safire/sd6118i-2ptvi/sd6118i-2ptvi_user-manual_3399663031.webp)
User Manual of HD-TVI Speed Dome
25
Steps:
(1)
Move the cursor to
EDIT PATROL
and click
IRIS+
to enter edit mode.
NUM PST DWELL SPEED
1 0 6 30
2 0 6 30
3 0 6 30
4 0 6 30
5 0 6 30
6 0 6 30
7 0 6 30
IRIS+ OK IRIS- CANCEL
Figure 3-14
Edit the Patrol
(2)
Click up/down direction buttons to choose the number and locate the preset to be edited.
(3)
Click left/right direction buttons to position the cursor to the column of
PRESET
,
DWELL
and
SPEED
. You can click the up/down direction buttons to set the value of preset number, dwell
time and patrol speed.
The presets you set for a patrol should be the ones that have been pre-defined by users.
The dwell time (0~800 seconds selectable, which are divided into 30 levels) is the time
that the speed dome stays on a certain preset; the patrol speed (level 1~40 selectable) is
the scanning speed the speed dome switching between the presets.
(4)
Follow the above steps to define the other presets for the selected patrol. You can configure
up to 32 presets in sequence for a patrol. Press
IRIS+
to save the new settings or press
IRIS-
to cancel and return to the previous menu.
4.
Preview the patrol.
Move the cursor to
PREVIEW
and click
IRIS+
to preview the current patrol. You can click
IRS+
again to stop the preview.
5.
Call the defined patrol.
You can call the special presets to call the defined patrol. E.g. call preset 35 to call patrol 1.
Please refer to
Section 2.3
to find the corresponding preset number for each patrol.
6.
Delete a patrol.
You can move the cursor to
CLEAR PATROL
and click
IRIS+
to delete the current patrol.
7.
Define the dwell time when running the fast patrol.
If you call the No.46 preset to enable the fast patrol, the speed dome will run the patrol
automatically according to the route consists of the configured preset 1 to preset 32. And you
can set the Patrol_D time switches from one preset to the other. 5S, 10S, 20S, 30S, and 60S are
selectable.