![background image](http://html1.mh-extra.com/html/safire/sd6118i-2ptvi/sd6118i-2ptvi_user-manual_3399663033.webp)
User Manual of HD-TVI Speed Dome
27
automatically memorize the path you operated as a pattern.
(3)
Click
IRIS+
again to save the pattern and exit edit mode.
⚫
REMAIN MEMORY
indicates the remaining memory of the speed dome for configuring the
patterns. When it reaches 0, no more patterns can be configured. You can also see the
remaining memory shown under
PATTERNS
menu as
REMAINING
.
⚫
The pan/tilt movements and the lens operations cannot be memorized simultaneously.
4.
Preview the pattern.
Enter the
PREVIEW
menu to preview the current pattern.
5.
Call the defined pattern.
You can call the special presets to call the defined pattern. E.g. call preset 41 to call pattern 1.
Please refer to
Section 2.2
to find the corresponding preset number for each pattern.
6.
Delete the patterns.
To Delete a Chosen Pattern
Click
IRIS+
to enter
RECORD PATTERN
and you can see
DEL PATH ABOVE
. Click
IRIS+
to delete
the pattern.
If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern
2 is deleted, pattern 3 and pattern 4 will be deleted as well.
To
Clear All the Patterns
Enter
CLEAR
menu and click
IRIS+
to delete all the defined patterns.
3.4.5
Configuring Timing Tasks
Purpose:
A timing task is a preconfigured action that can be performed automatically at a specific date and
time.
Steps:
1.
Move the cursor to enter the
TIMING TASK
submenu:
MAIN MENU > DOME SETTINGS > TIMING TASK
TIMING TASK
TASK NO. 1
ENABLE TASK ON
TASK ACT NONE
TASK TIME
TASK PREVIEW
TASK CLEAR
BACK EXIT
Figure 3-17
Time Task Configuration Menu