User Manual of HD-TVI Speed Dome
29
WEEK WHOLE WEEK
START(H-M) 00 00
END(H-M) 00 00
IRIS+ OK
IRIS- CANCEL
Figure 3-18
Set the Task Time
6.
Delete the task.
Move the cursor to
TASK CLEAR
, click
IRIS+
to delete the time and action of the current task,
and click
IRIS+
again to confirm the settings and exit.
3.4.6
Configuring Zone
Purpose:
A zone is a panning and tilting area defined by the left/right limits. You can configure the zones on
ZONES
submenu. You can define a zone when the targeted surveillance scene is limited.
Steps:
1.
Move the cursor to enter the zone configuration submenu:
MAIN MENU > DOME SETTINGS > ZONES
ZONES
ZONE NO. 1
<UNDEFINED>
EDIT ZONE
ZONE STATUS ON
SCAN STATUS ON
CLEAR ZONE
BACK EXIT
Figure 3-19
Zone Configuration
2.
Choose the zone number:
(1)
Move the cursor to
ZONE NO.
and click
IRIS+
button to enter the edit mode.
(2)
Click the up and down buttons to select the zone number to be configured.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
Up to 8 zones can be configured.
3.
Configure the zone area.
Steps:
