C. Basic Use
27
28
Replace child restraint pad by reversing order.
Starting from top of the child restraint, slip pad on plastic shell;
insert buckle and pull harness tightening strap through pad.
Slip pad over front of the plastic shell.
Attach all of the plastic tabs on the sides of plastic shell. Attach
both elastic straps to the belt path guide.
Rethread harness (see section C-11).
Cleaning Pad
Machine wash separately with cold water on a gentle cycle.
Do not use bleach. Tumble dry separately for 10-12 minutes
on low heat. Remove immediately.
Spot clean the harness straps.
Pull Buckle Through Pad
Remove pad.
5.
Remove Pad from
the Bottom of Child
Restraint
4.
Do not use child restraint without the pad.
C-9
Canopy Use and Installation
To Remove Canopy
Unfasten the fastening
strip on the back of the
child restraint.
1.
Slide Canopy Fabric to
One Side
Slide the canopy to one
side of the child restraint
to expose the canopy
hoop connection.
2.
To Adjust Canopy
Grasp the front or sides
of the canopy and move
front to back to desired
location.
4.
Undo Canopy Hoop
Pull top canopy up and
bottom down where they
connect to unhook. Then
pull the hoop apart.
Reverse to put back
together.
3.
4358-6459A SF Onboard 22.indd 29-30
4358-6459A SF Onboard 22.indd 29-30
9/5/14 4:27 PM
9/5/14 4:27 PM