background image

Stage 1

Toddler Car Seat 

with Built-in 

Harness

Copyright © 2022, Baby Trend, Inc.

EFB49FF_40_032822.1_PS_U

WARNING

Stage 2

High-back Booster 

Car Seat

Stage 3

Backless Booster

Car Seat 

Carefully read and understand all instructions and warnings in  

this manual. Failure to properly use this Car Seat increases the 

risk of SERIOUS INJURY or DEATH in a sudden stop or crash.

KEEP INSTRUCTIONS FOR FUTURE USE. 

Store this manual in the pocket provided on the back of the seat.

OWNER’S MANUAL

Para instrucciones en Español, conéctese a 

www.babytrend.com o llamar al: 1-800-328-7363.

Car Seat

Convenience through innovation and thoughtful design

www.babytrend.com

WARNING

Stage

 

1

Toddler Car Seat 

with Built-in 

Harness

Stage

 

2

High-back Booster 

Car Seat

Stage

 

3

Backless Booster

Car Seat 

Combination Booster Seat

Store this manual in the pocket provided 

on the underside of the seat cover as  

 illustrated above.

Carefully read and understand all instructions and warnings in this 

manual. Failure to properly use this Car Seat increases the risk of 

SERIOUS INJURY or DEATH in a sudden stop or crash.

1-800-328-7363 

 

(8:00 a.m. ~ 4:30 p.m. PST)

www.babytrend.com

Baby Trend, Inc.

13048 Valley Blvd.  

Fontana CA 92335

OWNER’S MANUAL

Para instrucciones en Español, conéctese a 

www.babytrend.com o llamar al: 1-800-328-7363.

KEEP INSTRUCTIONS FOR FUTURE USE. 

Store this manual in the pocket provided on the side  

of the car seat base.

Hybrid 3-in-1 Combination Booster Seat

FB49

Summary of Contents for HYBRID



















































Reviews: