27
© 2017 SafeLine and all the SafeLine products and accessories are copyrighted by law.
EVAC v1.24 EN
Service
If an error is registered, a small “i” symbol will
flash in the display. An error generated internally
or received from a node will be registered in the
error list. The list is viewed in the “SETUP” menu.
Error codes:
000 = SD-card connection failed
002 = SD-card play file failed
003 = Incorrect settings
004 = CAN bus error
005 = Mic speaker test failed
006 = SD-card test failed
008 = Lost node
009 = LMS com error
010 =
Internal LMS error
011 =
Missing self-test response
012 =
Expected node/floor station missing
Nodes:
001 - 099 = Floor station
100
= Car station
125
= LMS unit
126
= Entrance station
Error example:
012:002 (Error code:Node ID)
012 (Error code) =
Expected node missing.
002 (Node ID) =
Error code applies to node: floor station
no. 2.
The log file is created in a folder called ‘LOG’ on
the entrance station’s SD card.
The log file is a .txt file and can be opened in any
text editor.
Each log entry consists of:
ENTRY - Serial number starting on 1.
TIME - Time stamp parsed from the
real time clock.
CODE - Log code.
DATA
- Any data connected to the log code
and a describing text.
A log entry with a code above 128 characters is
not described and will be used for internal errors.
Current log codes in hex:
1 = BOOTUP
2 = ENTER_IDLE_MODE
3 = ENTER_EVAC_MODE
4 = ENTER_FIRE_MODE
5 = NODE_CONNECTED
6 = NODE_FAILED_CONNECT
7 = NODE_DISCONNECTED
8 = NODE_ACTIVE_FOUND
9 = NODE_OUTSIDE_MAX_FOUND
10 = NODE_INACTIVATED_FOUND
11 = ERROR_SD_CARD_CONNECT_FAILED
12 = ERROR_MIC_SPEAKER_FAILED
13 = ERROR_SD_CARD_TEST_FAILED
14 = NODE_LOST
15 = SELF_TEST_RESULT
16 = SELF_TEST_MISSING_RESPONSES
17 = SELF_TEST_MISSING_SD_CARD
18 = ERROR_CAN_BUS_ERROR
19 = ERROR_SD_CARD_FAILED_TO_PLAY_FILE
20 = NODE_MISSING_AT_BOOTUP
21 = EVAC_ALARM_RECIEVED
22 = SELF_TEST_STARTED
23 = SD_CARD_CONNECTED
24 = LMS_UNIT_FOUND
25 = LMS_UNIT_LOST
26 = NODE_SD_CARD_CONNECTED
27 = NODE_SD_CARD_DISCONNECTED
ERROR LIST
LOG FILE