Safeline EVAC, Manual, Page: 25 / 28

25
© 2017 SafeLine and all the SafeLine products and accessories are copyrighted by law.
EVAC v1.24 EN
Operating
System
→
Max nodes - Maximum number of nodes to
be presented in the “CONNECT” or “EVAC”
menus. To be displayed in the system, this
should be set to the same number as the
highest node ID (of the floor stations).
→
Fire Mode - Set the node ID of up to 2
floor stations which will act as FIRE mode
intercom stations. This setting ignores
“Number of nodes” and any individual
node’s state (active / inactive). Set the node
ID to 0 if you do not want to use FIRE mode
on any station. Press Up-key/Down-key to
select the next position.
→ Admin PIN - Set PIN for entering the
“SETUP” menu.
→
User PIN - Set PIN for entering the
“CONNECT” menu.
→
Broadcast - Setup the broadcast sound
files (5 sound files). Press Up-key/Down-key
to select next broadcast sound file position.
→
Label - set the label of a sound file
position.
→
State (On/Off) - set a sound file’ state.
→ Test sound - Trigger a broadcast.
→ Testing sound - Currently
broadcasting.
→ Date - Set the current date for the RTC
(Used by the LOG handler and self-test).
→ Time - Set the current time for the RTC
(Used by the LOG handler and self-test).
→
Self-test - Settings for the self-test.
→ Time - Specifies when on the day a
self-test will be triggered.
→ Interval - Specifies the interval (in
days) between tests.
→
Start self-test - Activate the self-test.
→ Read config from SD - Reads configuraton
from the SD card.
→ Factory reset - Reset all parameters (not
RTC) to factory default. The reset is only in
RAM, so to store the settings in flash you
also need to exit the setup menu.
→
Languages - set the language to be used
on the unit. Choose between German or
English.
→
Deutsch (German)
→ English
Entrance station
→
Backlight - Set the background light
intensity of the entrance station.
→
Volume - Set the speaker volume of the
entrance station.
→ Inputs - When in the input functions. Press
Up-key/Down-key to select another input.
→ Input function - Set which functions
to be triggered for the inputs.
→ PTT
→ FIRE
→
EVAC
→ OFF
→
Outputs - When in the output functions.
Press Up-key/Down-key to select another
output.
→
Output function - Set which functions
to be triggered for the outputs.
→
OFF
→ PTT_ACK
→ FIRE
→
EVAC
→ Hardware version - Information about the
hardware.
→ Software version - Information about the
software.
Car
→ Volume - Set speaker volume for the node.
→ Hardware version - Information about the
hardware.
→ Software version - Information about the
software.
→ Mic Level - Set microphone level.
→ Inputs - When in the input functions. Press
Up-key/Down-key to select another input.
→
Input function - Set which functions
to be triggered for the inputs.
→
Off
→
Alarm button
→
Outputs - When in the output functions.
Press Up-key/Down-key to select another
output.
→
Output function - Set which functions
to be triggered for the outputs.
→
Off
→
Alarm button ACK
SETUP MENU STRUCTURE