Safeline EVAC, Manual, Page: 26 / 28

26
© 2017 SafeLine and all the SafeLine products and accessories are copyrighted by law.
EVAC v1.24 EN
Operating
Nodes - Select target node by pressing up/down.
There is also an option to select all nodes.
→ State (active/inactive) - Set if the node
is active/inactive for EVAC/connect
mode.
→ Label - Set how the node is shown in
EVAC/connect mode.
→ Inputs - When in the input functions.
Press Up-key/Down-key to select another
input.
→ Input function - Set which
functions to be triggered for the
inputs.
→
Off
→ Alarm button
→ Outputs - When in the output functions.
Press Up-key/Down-key to select another
output.
→
Output function - Set which
functions to be triggered for the
outputs.
→
Off
→ Alarm button ACK
→
Volume - Set speaker volume for the
node.
→ SoundFiles - When in the sound files.
Press Up-key/Down-key to select another
sound file.
→
Mode - Mode for the sound files
(Off, On, Repeat).
→ Repeat - Delay time [s] between
repeats.
→ Indicate - Select node to indicate.
→
Indicating - Indicate selected
node.
→ Hardware version - Information about
the hardware.
→ Software version - Information about
the software.
Log - Read the log (stored in the SD card of the
entrance station).
Errors - Read the current errors.
LMS - When in the LMS menu. Press Up-key/
Down-key to select another LMS trigger.
→ Activate Trigger - Set if the selected
trigger is active or inactive.
→ Send test message - Test send the
selected LMS.
→
Relay Function - Set selected function.
→ OFF
→
FIRE + EVAC Low
→ FIRE + EVAC High
→ FIRE Low
→
FIRE High
→ EVAC Low
→
EVAC High
→ Hardware version - Information about
the hardware.
→
Software version - Information about
the software.
→
Code - What LMS code to be sent upon
a trig.