SAFE HOME WS500S, User Manual

Page: 8 / 112

www.safehome.dk 8
3.2 Panic Signal without a Siren
If you are forced to disarm the System, enter the Duress Password to stop the siren from
sounding; the Smart Panel will silently transmit the alarm signal to the optional response
devices (Auto Dialer, Wireless Dialer/Control & Outdoor Bell Box) for emergency help.
Duress Password:
Enter PIN +
3.2.1 Panic Signal
Pressing + buttons together on the Keypad / Key Fob Remote for instanta-
neous emergency response
3.3 Operating different Modes
The system consists of 4 Operating Modes (STANDBY, ARM, ALERT, and HOME) to suit
the user’s needs. You may select from the 4 modes to be applied to the sensors.
3.3.1 STANDBY Mode
If in Standby, the Smart Panel is prepared for mode selection.
3.3.2 ARM Mode
If in Arm Mode, the Smart Panel alarm will sound and the Smart Panel (All in RED) flashes
every 1.5 seconds when the system is triggered.
ARM mode default setting::
Zone Status (MODE)
Door/Window Sensor 1 ARM
Motion Sensor (PIR) 8 ARM
A. Arming the System
On the Smart Panel: First make sure the Smart Panel is in STANDBY mode by following
steps below for arming the system:
On the Key Fob Remote: Press
to activate.