SAFE HOME WS500S, User Manual

Page: 11 / 112

www.safehome.dk
11
Step Description Note
3 Smart Panel (All in RED) flashes every 1.5 seconds with
triggered zone indication until the system is disarmed.
To disarm the system, enter the 4-Digit PIN or press
on the remote control to exit the current mode.
4 Return to ARM
Mode after the
initial triggering After this initial triggering, the alarm will trigger again
immediately upon opening of the door without the entry
delay.
3.3.3 ALERT Mode
If in Alert mode, the Smart Panel chime will sound and the Whole Smart Panel (All in
GREEN) flashes every 1.5seconds with triggered zone indication when the system de-
tects a intruder in the protected area.
ALERT mode default setting:
Zone Status (MODE)
Door/Window Sensor 1 ARM
Motion Sensor (PIR) 8 ARM
A. Entering ALERT Mode
On the Smart Panel: First make sure the Smart Panel is in STANDBY mode by following
steps below for entering into ALERT mode:
On the Key Fob Remote: Press
to activate.
Step Keys Description Note
1
PIN +
You must be in
STANDBY mode
before
programming To make sure you are in STANDBY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2 PIN
+
+
ALERT mode The System will enter ALERT Mode.
If the Zone is enabled, a number will
appear as displayed in the image
below: