SAFE HOME WS500S, User Manual

Page: 15 / 112

www.safehome.dk
15
4. Installing the Sensors
4.1 Introduction to the Sensors
This package includes 2 wireless Sensors and 1 Key Fob Remote, which have a pre-pro-
grammed default setting that begins working immediately once the battery is activated. It
is advisable to install the main package first and then personalise the settings once the
System is functioning properly. This section should help you to change the System set-
tings in order to create a more personalized home environment.
4.2 Installing the Sensors
First, determine the location of the sensors.
• The Sensors should not be easily accessible.
• The Sensors should be placed in the most vulnerable rooms or near key entry points.
• The Sensors should not be placed near extreme temperature sources (ovens, stoves
etc.) or near large metal objects that could interfere with the wireless performance.
• If necessary, change to a different location for better RF performance
Once you have selected a location for the Sensors, you are ready to begin powering up
the System.
4.2.1 Installing the Door/Window Sensor
The Door/Window Sensor consists of two pieces. The sensor detects when a door or a
window is opened. The two parts are fastened near the door or the window. One part
functions as the transmitter and the other as the magnet. Once the Sensor is installed,
any abnormality in the circuit will trigger an alert message that is transmitted to the Smart
Panel. The Door/Window Sensor is pre-programmed in Zone 1; however, the settings can
be adjusted according to your needs. (See 3.3 & 4.3 Zone Settings)
A. Powering up the the Door/Window Sensor
Remove the battery cover; insert new batteries noting the polarity as shown in the dia-
gram below; replace the cover. (Requires 2 - alkaline AAA batteries)
Low Battery indication, If the batteries need to be replaced, a slow flashing of the RED
LED will indicate low battery
Motio