SAFE HOME WS500S, User Manual

Page: 7 / 112

www.safehome.dk
7
2.3 Understanding the Battery and AC Adaptor icon
Battery icon
Full
High
Middle
Low The battery icon shows when the AC power supply is un-
plugged or interrupted.
9V battery functions as BACK UP and the
symbol
means LOW BATTERY, the LCD Backlight flashes yellow for
30 sec. and
will blink until the new battery is replaced
or the AC power supply is plugged in.
AC adaptor icon When the AC adaptor to the Smart Panel is connected to a
wall socket, the AC symbol
will appear.
The backlight will be ‘ON’ for 10 secs while the AC adapter
connects to the power supply.
3. Using the Wireless Security System WS500S
3.1 Programming your new 4-Digit PIN
Step Keys Description Note
1 You must be
in STANDBY
mode before
programming
your new 4-digit
PIN To make sure you are in STANDBY
mode:
Enter the default 4-digit PIN +
:
Press , the symbol disappears
from the screen.
2 Programming
your new 4-digit
PIN
Press then to set the new PIN
The Smart Panel will display the below
image :
3
4-digit PIN +
Enter your new
4-digit PIN
Enter the new 4-digit PIN
4
4-digit PIN +
Re-enter new
PIN for final
confirmation Re-enter the new 4-digit PIN
Press
for final confirmation.
One beep indicates that you entered
a valid PIN, two beeps indicate that an
invalid operation was performed.