SAFE HOME WS500S, User Manual

Page: 19 / 112

www.safehome.dk
19
4.2.4 Deleting a Remote Control from the Smart Panel
Step Keys Description Note
1
PIN +
You must be in
STANDBY mode
before
programming To make sure you are in STANDBY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Press the keys on
control panel to
go to deletion.
Then input ID
number on remote
control to be re-
moved. LCD display flashes the total num-
ber of remote currently enrolled to
the system
(e.g. If the Smart Panel has 3 re-
motes enrolled the LCD display will
flash “03”)
Input the remote ID no. (e.g. “02”)
for the remote you wish to delete
(Inputting “00” will delete all remote
controls)
LCD display will then flash the total
number of remotes enrolled after
deletion
(One beep indicates that the remote
was successfully deleted from the
Smart Panel)
3 Complete the set-
ting After the setting is completed, return
the Smart Panel to STANDBY for
mode selection.