Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au
Page 6 of 12
8
Remove the snorkel body
(Item 1) from the vehicle and
remove the upper mounting
bracket (Item 3) from the
snorkel body.
Position the upper mounting
bracket (Item 3) onto the A-
pillar and align the bracket
with the marked bracket
outline.
Mark the three mounting
hole positions with a felt tip
pen.
9
Drill a pilot hole at each of
the three marked positions,
drilling through both the A-
pillar panel and inner panel.
Drill both the A-pillar panel
and inner panel holes to
6mm.
Drill the three A-pillar panel
holes to 8mm diameter with
a step drill or 8mm drill bit.
Deburr and paint holes.
