Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au
Page 4 of 12
4
Align the guard panel
template (Item 16) to the
upper and rear edges of the
RHS guard panel as shown.
Tape the template to the
guard panel with masking
tape.
Mark all hole positions with a
felt tip pen.
Remove the template.
5
Drill a pilot hole for each of
the marked hole positions.
Use a 114mm diameter hole
saw to drill the snorkel body
outlet hole.
Use a step drill to drill the
five mounting holes to 16mm
diameter.
Deburr and paint all holes.
Hint: If the vehicle is fitted
with flares, place masking
tape over the join between
the flare and guard panel
prior to drilling to prevent
any swarf from entering
the join.
