Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au
Page 11 of 12
18
Carefully install the snorkel
body (Item 1) to the guard
panel, align the snorkel body
to guard panel and upper
mounting bracket.
When correctly aligned,
fasten the snorkel body to
the guard panel with body
washers (Item 8) and nyloc
nuts (Item 9).
Fasten the snorkel body to
the upper mounting bracket
with hex bolts (Item 4).
19
Align the air entry hose (item
12) for best fitment
(Ensure
the air entry hose is installed
hard up against the shoulder
of the snorkel body outlet)
,
correctly position the hose
clamps at either end of the
air entry hose and tighten.
