Safa Media SRM520, Instructions For Use Manual

Page: 4 / 19

Replacing the Battery
5
USED TO USB POWER (PC or DC Adapter)
1. Be sure that the Voice Recorder is switched off.
Switch off the Voice Recorder by pressing the
PLAY/STOP button for a few moments in stop mode.
→ Do not replace the battery while the Voice Recorder
is switched on, as this may cause the device to
malfunction.
6
2. Open the battery cover.
3. Insert the battery
- Make sure that the battery is inserted properly size
AAA and close the cover.
- Press the PLAY/STOP button for a few moments to
switch the Voice Recorder on.
→ Remove the battery if you will not be using the Voice
Recorder for an extended period. Leaking battery may
damage the Voice Recorder.
1. Connect the USB jack with your PC by means of an
USB cable.
2. Press the PLAY/STOP button for a few moments to
switch power on, and then Voice Recorder is in normal
operating mode.
3. Speaker operates only when Voice Recorder insert the
battery.
4. Speaker is not sound when Voice Recorder removes
the battery. You can hear to sound only the Ear-Phone.
Hold function
1. When the HOLD switch on the up side of the Voice
Recorder is in the Hold position, all buttons on the
device are inactive.
2. Slide the
HOLD switch to the OFF position to enable
the buttons on the Voice Recorder.
Getting Started
Getting Started
Switching the Voice Record On
1. Press and hold the PLAY/STOP button for a few
moments to switch on the Voice Recorder. The Voice
Recorder is in Stop mode (Fig.1) or Clock set mode (Fig.2).
→ The Voice Recorder switches on in the same mode
that it was switched off.
→ If the time is not set, the Voice Recorder will switch on
in Clock set mode.
→ The Voice Recorder will change to Stop mode when you
set the time or when you press the MODE/MENU button.
2. Press and hold the REC/STOP button for a few moments
to begin recording immediately.
3. If the HOLD switch is in the Hold position, “On HOLD”
will be shown briefly on the display, and the display will
turn off (Fig.3). Unlock the Voice Recorder by moving
the HOLD switch to the OFF position.
Full
Approximately half used
Almost empty
Battery empty
HQ HQ
Fig.1 Fig.2 Fig.3
→ Should your Voice Recorder malfunction, please
remove the battery and insert them again.