
INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
57
b)
Press
button.
c)
Enter a 64-symbol key consisting of hexadecimal values (0-9, A-F) or press
“Generate random key”
button.
d)
Select and copy the generated key.
e)
Press “Execute configuration” button.
f)
Repeat steps a)-e) for the local side of the link using the same copied AES key.
CLI commands (
Chapter 4: COMMAND LINE INTERFACE
modem aes key <64hexkey>
Use to set AES 256-bit key.
modem aes
Use to show AES state and key.
Networking
Networking
→
Ethernet
→
VLAN
The VLAN configuration window provides the configuration of port-based Ethernet Virtual
Local Area Networks (VLANs), allowing up to 4094 different VLAN IDs. It is possible to set
VLAN IDs as tagged or untagged members on each LAN port.
To add a VLAN tag to untagged packets in the
ingress direction, “Default VLAN” (2) should
be specified. By default, the
“Default VLAN” value on all ports is VLAN ID 1.
An example below shows a sample configuration with VLAN IDs 100-300 configured as
tagged members on LAN2 and WAN ports (user traffic) and VLAN ID 500 as a tagged
member on LAN2 and WAN ports and untagged member on MNG port (management traffic).
Summary of Contents for Integra
Page 1: ...SAF Tehnika JSC 1 User manual Integra Integra S Integra G Integra GS VER 2 37 FW 3 20 19...
Page 63: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 63 Status mode Press button...
Page 88: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 88 Status mode Press button...
Page 94: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 94 Status mode...