
INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
30
Ethernet management connection configuration
Before proceeding with the initial link setup in the Web GUI, you must adjust the IPv4
settings of your LAN adapter to 192.168.205.0 subnet. The IP address should be something
other than the default low/high side IP addresses (192.168.205.10/192.168.205.11).
After applying these settings, you are ready to connect to the Web GUI or establish a
SSH/Telnet connection. Refer to
Chapter 4: COMMAND LINE INTERFACE
for the details on
how to connect to other CLI interfaces (serial, SSH, Telnet).
Accessing Web GUI
1.
Launch your browser and in the address field enter the IP address of a FODU. Default IP
addresses are as follows:
•
192.168.205.10 for low side FODU (P/N D*******
L
*)
•
192.168.205.11 for high side FODU (P/N D*******
H
*)
For secure connection use
https://
prefix.
2.
Press “Enter” key.
3.
The login screen will appear.
4.
Enter username and password. Default credentials are as follows:
•
Username:
admin
•
Password:
changeme
Summary of Contents for Integra
Page 1: ...SAF Tehnika JSC 1 User manual Integra Integra S Integra G Integra GS VER 2 37 FW 3 20 19...
Page 63: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 63 Status mode Press button...
Page 88: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 88 Status mode Press button...
Page 94: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 94 Status mode...