
INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
11
1
Remove Integra/Integra-G FODU with an
antenna from the mounting bracket.
The default polarization is vertical.
2
Using 13mm wrench remove indicated nuts
and fixation plate [10, 11, 12, 13, 14].
3
Removed parts must be attached back with
a 90-degree offset (see above). The gap
between side screw flange nuts [13] and
fastening angles should be 5mm.
4
View of Integra/Integra-G FODU with
swapped polarization.
5
When polarization is changed, make sure
that the drain hole cap located at the
grounding flange nut is removed and
inserted into the previous drain hole.
Summary of Contents for Integra
Page 1: ...SAF Tehnika JSC 1 User manual Integra Integra S Integra G Integra GS VER 2 37 FW 3 20 19...
Page 63: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 63 Status mode Press button...
Page 88: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 88 Status mode Press button...
Page 94: ...INTEGRA S G GS User Manual WEB GUI SAF Tehnika JSC 94 Status mode...