SAF Integra, User Manual, Page: 15 / 94

INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
15
7
When alignment is finished tighten screws
marked with red dots on the right side view of
the mounting bracket: hex flange nuts and
bolts of azimuth and elevation eye screws, right
side screw on Integra FODU, and hex flange
bolt on azimuth angle indicator with torsion
20...25 N·m.
8
Additionally tighten the following screws
marked with red dots on the left side view of
the mounting bracket: the left side screw on
Integra/Integra-G FODU and two hex flange
bolts between both mounting bracket clamps
for housing and pipe with torsion 20...25 N·m.