Opal Pro to Mod TCP
Page 7
LED Indicators
Two bi-colour (red/green) LED indicators are mounted beside the network
connector. The upper LED indicates the Ethernet interface card status.
LED State
Ethernet Interface Card Status
OFF
No power
Flashing Red
Recoverable configuration fault (card is not
configured, contact Brock Solutions for support)
Solid Red
Hardware Error (contact Brock Solutions for support)
Flashing Green
No errors client interface is not open ( check software
firmware version of Opal Pro)
Solid Green
No errors (normal operation)
Amber
(Red/Green)
Configuration Mode (card is not configured, contact
Brock Solutions for support)
The lower LED indicator indicates the Ethernet Network status.
LED State
Ethernet Network Status
OFF
Network interface offline, No network power
Flashing Red
I/O connection in timed-out state or other
Recoverable fault
Flashing Green
Device in online but has no connections
Solid Red
Unrecoverable fault
Solid Green
Online with established connections
Amber
(Red/Green)
Device is in Communication Faulted state and
responding to an Identify Communication Faulted
Request
