Opal Pro to Mod TCP
Page 9
15.04 Comm Fault
Enable
Disable
Enable – Opal Pro trips out on a
communication fault
Disable – Nothing happens on a
communication fault
15.05 Comm Fault
Time
0.1 to 5.0
secs
This is the time setting that the Opal
Pro uses to detect a communication
fault. Bit 15 of the command word
must change state twice with in the
time set in this parameter.
If parameters in group 14 are modified the changes do not take effect until
the control power for the Opal Pro is turned off and then back on again.
