SAF OPAL Ethernet IP Interface MS6 SERIES, User Manual

Page: 13 / 14

Opal Pro to Mod TCP
Page 13
12.01 Input Word
27 Analog Output 16 = Current Reference
17 = Current Feedback
18 = Overload level
19 = Phase Angle
13.01 Input Word
28 Motor Amps Motor nameplate current in Amps
13.02 Input Word
29 Motor Volts Motor nameplate volts in Volts
13.03 Input Word
30 Service
Factor Motor nameplate service factor x 100
14.01-14.06 Input Word
31- Input
Word 36 Reserved
14.07 Input Word
37 Node Number 1 – 254
14.08 Input Word
38 IP Address 1 0 – 255
14.09 Input Word
39 IP Address 2 0 – 255
14.10 Input Word
40 IP Address 3 0 – 255
14.11 Input Word
41 IP Address 4 0 – 255
14.12 Input Word
42 SubNet 1 0 – 255
14.13 Input Word
43 SubNet 2 0 – 255
14.14 Input Word
44 SubNet 3 0 – 255
14.15 Input Word
45 SubNet 4 0 – 255
15.01 Input Word
46 Shear Pin Flt 34 = Enabled
35 = Disabled
15.02 Input Word
47 MOL Fault 36 = Disabled
37 = Class 10
37 = Class 15
37 = Class 20
37 = Class 30
15.03 Input Word
48 Overload
Level In %
Drive trips at 100%
15.04 Input Word
49 Comm Fault 41 = Enabled
42 = Disabled
15.05 Input Word
50 Comm Flt
Time Time in seconds x 10