EN
22
DIGIWAVE
III
Create a program
To create a program, press on
and select “Create program” then press on OK
Select the number of the created program
Then call the program (if necessary, see step 3 of the first HMI configuration)
You cannot create a program in these three different cases:
-
If a program list is activated.
-
If the user doesn’t have the right of program management.
-
If a limitation on the current program is activated.
Save a program
Once a setting modification is done on a created program, the symbol
appears meaning that the modification can be saved.
To save the modifications, press on
select “Save program”, then press on OK and the symbol
will disappear.
To cancel the modifications done since the last save, select “Restore” and press on OK.
Rename a program
To rename a program, press on
select « rename a program », then press OK
Note
: This function will not backup any changes
Load a program
To load a program already created, press on
. With the button
, select the program you want to load in the list of created programs puis OK.
You can also load programs from the page of welding programs selection.
Copy a program
To copy a program, load the program you want to copy, and then create a new program from the one loaded.
