SAelen TS GS/TIGER 25D, Technical Manual

Page: 12 / 60

13. For transport, the wood shredders must be brought into the transport position:
A) Lift up the funnel flap and check whether the lock has clicked in.
B) Take the wood shredder into the transport position and check whether the security bolts
are clicked in.
C) Turn the ejection channel so that it does not protrude beyond the side of the machine
.
D) Push all parking locks up if necessary
14. When driving on public roads, the lighting must correspond with the England Traffic
Road Regulations.
15. When working, the wood shredder must be positioned steadily in a horizontal position
and must be secured against rolling away.
16. Single axle motor devices are attached to traction vehicles and, if available, the park
brake is applied. For operation without a traction vehicle, the parking locks (front and back)
must be lowered.
17. Minimum clearance of 10 m from the machine to the ejection must be maintained due
to safety reasons. The objection must always be averted by operating personnel
18. You may only reach into the retraction opening with your hands when the motor has
been shut down and the hacking disc has come to a standstill engine stopped.
19. The authorised hydraulic operating pressure set in the factory may not be changed
20. Only trunks up to 5,51 inches diameter may be processed in the wood shredder.
21. The hydraulic system must be subjected to an expert inspection every year. The
hydraulic hoses are to be replaced after five years
.
22. Do not reach into the supply funnel when filling the wood shredder. Blockages must be
dealt with safely (stop motor, use aids). To push short pieces or branch-like hacking items
through, only use sturdy wooden sticks or other aids made of wood. I will wood shredders
are only suitable for manual loading. Do not move around the ejection area.