SAelen TS GS/TIGER 25D, Technical Manual

Page: 13 / 60

23. Perform a function test every day before initialisation, especially on the safety equipment
(tightening of the wheelhouse wheel, lock covers, safety switches cowlings and access chimney).
Hacking blades and counter blades are also to be tested for function and a tight fit.
24. Operating personnel must be inducted thoroughly before initialisation
.
25. The hacking disc may only be released once it has come to a full standstill and the motor has
been switched off.
26. Danger due to flying parts. Attention must be paid that parts such as wood chips can also fly
out of the funnel in the operating area. Body protection must always be attached. The machine
should be operated to the side of the funnel.
27. Information for all motor machines:
The tilted position of the motor may be a maximum of 25° during operation (driving). With too
little oil, lubrication of the motor is not even guaranteed at 25°!
28. Take care on slopes. The machine driver must ensure that the machine is always safely
driven and is kept steady and safe during work
.
29. After coupling the machine to the tractor, lift up, or better to remove the jockey wheel.
30. The machine may only be loaded with wood. Make sure that no stones or metals enter the
machine.
31. The machine may not be used to transport goods or persons.
32. The machine may not be used to push or pull anything.
33. The battery acid is very corrosive. Avoid all contact with eyes, skin and clothing. In case of
contact, rinse immediately with water and ask for medical advice if necessary.
34. Before connecting the machine to the power net, the cable linked to the positive side of the
battery must be removed.
35. Interventions must be handled by a qualified technician. All interventions for assembly,
disassembly and/or specific maintenance must be handled by a recognized distributor.