Saeco OTC SERIES, Service Manual

Page: 17 / 62

INCANTO 02 TECHNICAL SPECIFICATIONS
6/6
If after descaling or after the use of a filter this is not reactivated , the machine recognizes the water
hardness setting and calculates as in the table below
Descaling cycle frequency
Hardness WATER HARDNESS Without water filter Not reactivating the filter
1 Soft (up to 7°dH) 240 litres (480,000 pulses) 210 litres (420,000 pulses)
2 Medium (7° - 14°dH) 120 litres (240,000 pulses) 105 litres (210,000 pulses)
3 Hard (15° - 21°dH) 60 litres (120,000 pulses) 52.5 litres (105,000 pulses)
4 Very hard (over 21°dH) 30 litres (60,000 pulses) 26.25 litres (52,500 pulses)
The default water hardness level is 4. Each litre of water corresponds to approximately 2,000 pulses.
Descaling frequency in AQUACLEAN
The first activation must make before you've paid up to 5000ml products because mind thinks as
if he had the filter
Hardness
Filter num-
ber
Percentual on
display 10%
the icon flashes
slowly. (encourage
the consumer to
buy the filter)
Percentual on
display 0% the
icon flashes
quickly. (tell
the consumer
to change the
filter)
MAX Quantity
water, the icon
turns off. (re-
place filter)
Indifferent
From 1/8 to
7/8
8050ml 2000ml
62500ml
75000ml only OTC
Replace filter (you
can not turn off)
8/8 Descaling