Saeco OTC SERIES, Service Manual

Page: 12 / 62

INCANTO 02 TECHNICAL SPECIFICATIONS
1/6
2.1. Technical specifications
Power supply and output: 240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W
Temperature monitoring: (NTC) variable resistor sensor - transmits the value to the
electronic card
Safety system: 2 thermostats at 190°C one shot
Coffee heat exchanger output:
Stainless steel
(230 V~) 1900 W - (120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
Gear motor: 2 rotation directions; power supply 24VC
Pump: Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and thermal switch 100°C 48 W, 230V, 50 Hz, 120V,
60Hz 100V, 50/60 Hz
Overpressure valve: Opening at approx. 16-18 bar
Water filter: In tank
Coffee grinder: Direct current motor with flat ceramic grinder blades
Automatic dosage: Dose adjustment controlled by the electronic system
Power consumption: During heating phase- approx. 5.6 A
Dimensions: W x H x D in mm: 221 x 340 x 430 mm
(data may vary depending on the model)
Dimensions (EXT): W x H x D in
mm:
221 x 386 x 430 mm
(data may vary depending on the model)
Weight: 7.5kg - 8.0Kg (EXT)
(data may vary depending on the model)
Water tank capacity: 1.8 l - 2.5 l (EXT)
Coffee bean hopper capacity: 250 g. - 500 g (EXT)
Dreg drawer capacity: 15
Water circuit filling time: Approx. 15 sec Max. on first filling cycle
Heating time: Approx. 45 sec.
Grinding time: Approx. 8-10 sec.