English
6.7 Light coffee dispensing
This type of dispensing is performed by utilizing doses of pre-
ground coffee manually introduced into the machine through
the pre-ground coffee slot (ref.
6,
fig. 1). To the quantity thus
provided manually the machine autonomously adds a small
dose of ground coffee; this procedure compensates for the
lesser quantity of ground coffee present in the pre-packaged
bags and improves the organoleptic qualifies of the drink
dispensed.
-
Briefly press (less than 1 sec.), the key twice and
consecutively, the display will show "
LIGHT
COFFEE
"
-
introduce through the pre-ground coffee slot (ref.
6,
fig. 1),
the contents of one dose of pre-ground coffee;
-
press key or .
N.B.:
Dispensing with pre-ground coffee is programmable
only for one dose.
6.8 Dispensing coffee in jug
This function allows the dispensing of more coffees
(programmable) in a single container (such as a jug).
By pressing key 1 to 8 times, as many consecutive
dispensing instances as requested, up to a maximum of 2,5
liters of coffee.
-
Position the jug under the dispenser (ref.
21
, fig. 1).
- Briefly press (less than 1 sec.) key
for as many times
as the number of instances to be dispensed. The display
will show
"
JUG X ...
" with the number of programmed
dispensing instances;
-
press key to confirm and start the cycle;
- the machine will supply the dispensing instances
programmed and the display will show the icon of a jug
being filled with the number of instances already
dispensed.
- having completed the dispensing, the display will show
again "
READY FOR USE
";
- if the eye e has to be stopped before the preset time it will
be sufficient to either press the jug key or any coffee keys.
N.B.:
The electronic control of the machine automatically
manages the double coffee dispensing eye e to reduce to the
minimum the time taken.
Example:
by programming 5 dispensing instances, the
electronic control will set up dispensing for 2 double coffees
plus a single one.
N.B.:
Warning: after 1 jug dispensing at full dosage (approx.
2 liters) it is necessary to pause for 2 minutes to allow the
machine standard conditions restoration.
6.9 Hot water dispenser
(LUXE version)
This function allows multiple (programmable) dispensing of
hot water in a single container.
By pressing 1 to 8 times key as many consecutive and
continuous dispensing instances will be obtained, up to a
maximum of 1 liter of hot water in the same container.
-
Position the container under spout (ref.
11
, fig. 1).
- Briefly press (less than 1 sec.), multiple times, key
according to the number of desired dispensing instances.
The display will show "
HOT WATER X ...
" with the
number of programmed dispensing instances;
-
press key to confirm and start the cycle;
- the machine will supply the dispensing instances
programmed and the display will show the icon of a
container being filled with the number of Instances
already dispensed.
- having completed the dispensing, the display will show
again "
READY FOR USE
";
N.B.:
It is possible to dispense a programmed dose of hot
water only when function "
HOT WATER PROGRAMM
." is In
"
ON
" mode (see "6.14 Menu-programmable functions");
If instead the function is
"
OFF
", the dispensing must be
stopped by pressing again key .
Danger of burns
Never direct the hot wafer jet towards body parts.
Direct the pipe only by moving it through the special
rubber heat protector (ref. 9, fig. 1).
It is furthermore advisable to keep the spout
submerged within the container.
6.10 Steam dispenser
(LUXE version)
Submerge the spout (ref.
16
, fig. 1) within the liquid to be
warmed up and rotate the knob (ref.
12,
fig. 1) anti-
clockwise.
After having reached the desired temperature close the knob
again by rotating it clockwise.
Danger of burns
Never aim the steam jet towards body parts. Direct the
pipe only by moving it through its rubber heat
protector (ref. 14, fig. 1).
It is advisable to keep the spout submerged within the
container.
Important
After each usage always clean the traces of the heated
drink from the spout with a moist cloth.
11
