RINSING
PROGRAMM
This function allows the dispensing of a minimum quantify of hot
water (abt 5 cc) by the machine to prevent sediments in the coffee
dispenser from forming; this wash is automatically carried out
after a programmed time lapse (20 to 240 minutes) from the last
dispensing of coffee.
-
By confirming
"
ON
", the modification cursor is set on the last
digit to the right and its value can be modified through steps of
10 min. at a time;
always confirm possible modifications.
-
By confirming
"
OFF
", the machine doesn't perform any wash.
N.B.:
During the wash the machine displays "
RINSING PRO-
GRAMMED
"; the wash can also be manually carried out by
pressing key for three seconds.
This function allows the washing of the brewing unit (ref.
25,
fig.
1), by using the specific tablets (for information on the tablets refer
to the authorized service center), and has been set up so that the
user is guided through the various operation phases.
-
The process starts from point "
GROUP RINSING
".
-
Press key
the display visualizes
"
PUT THE TABLET
INTO THE GROUP
".
- Draw the brewing unit out; the display visualizes "
INSERT
BREWING UNIT
".
- Insert tablet in the brewing unit and return the unit in
position; the display shows "
CLOSE SERVICE DOOR
".
- Close the door; the display shows "
RINSING
" The machine
starts the actual wash cycle at the end of which the display will
show "
REMOVE THE GROUP AND RINSE IT WITH
WATER
".
- Remove the brewing unit; the display shows "
INSERT
BREWING UNIT
".
- Proceed to wash the brewing unit in running wafer. Re-Insert
the brewing unit; the display shows
"
CLOSE SERVICE
DOOR
".
-
Close the door; the display shows "
RINSING
COMPLETED PRESS STAR BUTTON
"
Press again key to finally quit the menu and to make the
machine ready for use
.
CLOCK
This function allows the setting of the machine's clock and date
device.
-
By confirming
"CLOCK",
the cursor is positioned on top
of the hours that can then be modified.
-
After confirming the set time, the cursor moves to the next ele-
ment to be modified (the minutes, followed by the day of the
week, day, month and lastly the year).
16
This function allows to program the automatic switching on and
off of the machine, in two different time slots, for each day of the
week.
-
By confirming "
ON
", the machine is pre-set for this function.
-
By confirming "
OFF
", the machine can only be switched on
and off manually through the main switch (ref.
10,
fig. 1).
Automatic switch-on and switch-off that have possibly been
already programmed will be memorized in any case.
-
For the programming of time slots and days, see the next
function "
ON/OFF TIME
"
N.B.:
Automatic machine switching on is only possible with the
main switch (ref.
10,
fig. 1) In position "
I
".
English
GROUP RINSING
AUTOMATIC OPERATION
