English
LANGUAGE
-
If the "nation key" foresees the use of more than one
language on display, by using from the
"
LANGUAGE
"
menu, access can be gained to their selection.
-
If the "nation key" foresees a single language, by pressing
no other selection is accessed.
CUPWARMER
- By confirming
"
ON
", the cup heating plate is switched on at
the same time as the machine.
- By confirming
"
OFF
", the cup heating plate a ways remains
switched off.
GRINDER SETTING
- For each of the dispensing instances offered by the
machine if is possible to modify the quantity of ground
coffee utilized for dispensing, programmed during
installation phase.
-
By confirming
"
LOW
" or
"
HIGH
", this dose is respectively
reduced by 1 gram or increased by about 1 gram. By
confirming "STANDARD", the dose utilized for dispensing
remains that programmed by the Maintenance Technician.
TEMPERATURE
For each of the coffee dispensing instances offered by the
machines it is possible to modify the temperature of the water
used for dispensing, programmed during the installation
phase.
-
Confirming "
LOW
" or "
MINIMUM
" reduce the temperature
by 2 or 4° C respectively.
-
By confirming "
HIGH
" or "
MAXIMUM
", the temperature is
increased by 2 or 4° C respectively.
-
By confirming "
STANDARD
" the temperature remains that
programmed by the Maintenance Technician.
N.B.:
The "
FIRST
COFFEE
" temperature is utilized for the
first dispensing at machine switching on.
PREINFUSION
It is a function that allows a brief pause during the first
dispensing phase. This can improve the quality of the coffee
that during the pause has the time to "infuse" with the first part
of the water received.
-
By confirming "
SHORT
" or "
LONG
", two kinds of "pre-
infusion" can be obtained.
-
By confirming "
OFF
", no pre-infusion is taking place.
HOT WATER
PROGRAMM
.
By way of this function it is possible to enable the
programming of the quantity of hot water for dispensing.
-
By confirming "
ON
", if is possible to program key , as
already described (see "6.1 1 Programming of dispensing
keys").
-
By selecting
"OFF",
key will not accept programming
of the dose which will have to be managed manually.
During the dispensing of the various drinks, the machine
adds a certain quantity of hot wafer, according to the
programming carried out by the Technician.
-
By confirming
"ON",
the current mixing takes pace By
confirming
"OFF",
NO hot water is added with the dis-
pensing.
N.B.:
When the function is de-activated, the values
programmed by the Technician will remain unchanged so
that they can be utilized again at function re-activation.
15
the outlining of functions
continues on following page
HOT WATER MIXING
