• 27 •
Machine Installation - Service Provider Manual
A =
Soft water
B =
Hard water (standard)
C =
Very hard water
2
Immerse the "" water fi lter vertically in cold water
(with its opening positioned upwards) and delicately press its
sides so as to let the air bubbles out.
3
Remove the tank from the machine and empty it. Remove
the small white fi lter from the tank and store it in a dry place
sheltered from dust.
4
Put the fi lter into the empty tank. Press it to its limit stop.
5
Fill the tank with fresh drinking water and reinsert it into the
machine.
6
Switch to programming mode as described in section 10.1.
YELL
OW
7
Press the “
” button (24) until the following menu is dis-
played:
YELL
OW
8
Press the “
” button (18) to select “ON” and press the “
” button (24) to confi rm.
9
Exit the programming menu and dispense about half the
water tank content to activate the fi lter.
10
Fill the water tank again up to the MAX level with fresh drink-
ing water.
