• 36 •
Machine Installation - Service Provider Manual
4
Press the
“
”
button (18) to start the DESCALING cycle.
YELL
OW
Note: If this option is confi rmed, the whole cycle
must be completed. Press the "
" button (22)
to exit.
5
Pour the entire contents of the bottle of Saeco concentrated
descaling solution into the machine's water tank.
6
Fill with fresh drinking water up to the level marked by the
"CALC CLEAN" icon.
7
Place the tank back in the machine.
8
Drain any liquids from the drip tray and place it back into the
machine (see section 6.3).
9
Place a container under the steam/hot water wand and an-
other one under the dispensing spout.
Note: Use a container of at least 1.5 litres capacity.
YELL
OW
10
Press the “
” button (20)
.
YELL
OW
If you do not have a container of this capacity,
pause the cycle by pressing the “
” button (18),
empty the container, place it back in the machine and re-
start the cycle by pressing the “
” button (18).
11
At this point, the machine will start dispensing the descaling
solution at intervals (the bar shows the cycle progress).
12
When the solution in the tank is fi nished, empty and rinse
the tank with fresh drinking water, as indicated by the machine.
RED
13
Empty the containers used to collect the liquid dispensed by
the machine.
14
Remove any liquids from the drip tray and insert the tray
back into the machine.
