• 35 •
Machine Installation - Service Provider Manual
2
Also lubricate the shaft.
3
Insert the Brew Group into its seat again until it locks into
place, WITHOUT pressing the "PUSH" button.
4
Insert the coff ee grounds drawer and the drip tray. Close the
service door.
11.3 Descaling
Limescale is a natural part of the water used for machine opera-
tion.
It needs to be removed regularly as it may clog the water and cof-
fee circuit of your appliance.
The advanced electronics shows on the machine display (with
clear icons) when descaling is needed. Just follow the steps de-
scribed below.
Perform this operation before your appliance stops working due
to clear maintenance neglect.
Use the Saeco descaling product only. Its formula has been spe-
cifi cally designed to ensure better machine performance and op-
eration for its whole operating life. If correctly used, it also avoids
alterations in the brewed product.
The descaling solution and the complete "Maintenance Kit" may
be purchased at your local dealer or at authorised service centres.
Warning! Never drink the descaling solution or any
products brewed until the cycle has been complet-
ed. Never use vinegar as a descaling solution.
1
Turn on the machine by pressing the ON/OFF button. Wait for
the machine to complete the rinse and warm-up process. Remove
the Pannarello end part.
Warning! Remove the "Intenza" fi lter before add-
ing the descaling solution.
2
Switch to programming mode as described in section 10.1.
YELL
OW
3
Press the “
” button (24) until the following menu is dis-
played:
YELL
OW
