Saeco IDEA RST Series, Operation And Maintenance

Page: 109 / 228

English
10
109
23 upper protection cover
24 Crema adjusting lever
25 Temperature adjusting lever
26 milk dispensing spout
29 Cappuccinatore
30 Milk suction hose
31 fitting
32 fork
33 Cappuccinatore body cap
Cleaning Cycle of the Tubes
To perform a cleaning cycle of the tubes, follow the instructions below:
• immerse the milk suction tube into a container with water
Do not use hot water.
• press the button shown in the figure
• wait until the water has been dispensed.
10.3 Unscheduled maintenance
Unscheduled maintenance includes every part repair or
replacement,
that
can only be performed by the Maintenance
Technician.
10.3.1 Coffee Grinder Block
• A foreign body among the coffee beans can cause the
grinders block and, subsequently, the machine block; the
message “GRINDER ERROR” is displayed.
• In this case open the coffee grinder and remove the
foreign body.
10.3.1.1 Coffee Grinder
Assembly/Disassembly
• Close the coffee bean hopper partition.
• Remove the screws from the container by using the tool
supplied. Remove the container from the machine by
pulling it upwards.
Mod. LUXE / Mod. COFFEE / Mod. CAPPUCCINO
/ Mod. CAPPUCCINO USA