Saeco IDEA RST Series, Operation And Maintenance

Page: 63 / 228

English
63
Before connecting the
appliance to the water
mains, please read and
follow
the applicable
regulations in force in your
country.
If the power cord is
damaged, it must be
replaced by the
manufacturer, its service
centre or by adequately
qualified
personnel in
order to avoid any risks.
It is recommended the
installation of a residual
current device (RCD) with
a rated residual current not
exceeding 30 mA.
Connect the appliance to a
drinking water main with
pressure
between 0.15
MPA and 0.8 MPA (1.5
and 8 bar); see data on the
data plate.
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance. Do not use
the old set anymore.
Access to the internal area
is restricted to persons
having
knowledge and
practical experience of the
appliance, in particular as
far as safety and hygiene
are concerned.
Never clean the internal area of
the machine with power supply
on or with the plug connected.
In any event do not use water
jets or detergents.