Saeco GAGGIA VELASCA CMF-OTC, Service Manual

Page: 39 / 55

GAGGIA VELASCA 05 SERVICE MODE
8/8
CODE Description NOTES
01 Grinder fail
02
The grinder is disconnected (Only coffee grinder without
electronic sensor)
03 Bu movement toward WORK fail
04 Bu movement toward HOME fail
05 Water circuit fail
10 NTC short circuit fail
11 NTC open circuit fail
14 Heater over-temperature fail
15 Heater time-out fail
19 Zero-Crossing fail
Aroma
Standby Time
Alarm Refill
Grounds counter
Alarm Dreg Drawer
Brewing Group Loaded
Coffee Duct empty
GrinderAroma 1 Time
GrinderAroma 2 Time
GrinderAroma 3 Time
(*): ATTENTION! As a consequence of this reset the machine will grind for a longer time at first
coffee product after Steam Out. For this reason, after Steam out, the machine should be completely
cleaned from all beans and all coffee powder residuals in the grinder.
Medium (3 beans selected)
15 minutes
ON
Reset to zero
OFF
OFF
YES (*)
5500
7000
7500
5.3 Error Codes for Out of Order alarm
5.4 Saeco Service Center - Quick Start Guide
Saeco Service Center – Quick Start Guide
Press the icon to view the document
To open the attached document is necessary to save the service manual on your PC.
Saeco Service Center (SSC) is a tool with which you can re-program the machine and check the
diagnostic of the same.
You can download the software from the following link: http://logsave.logtronics.com/SSC2/publish.htm
In support of this tool it is essential to order the Saeco Programming Device:
Cod. 20000490 “KIT PROGRAMMER SERKIT SSC2”.
This kit includes the programmer and cables helpful.
All details related to the registration and operation are explained in the enclosed Quick start guide
(QSG).