61
English
Fig. 129
10.3.3 Motor replacement
The procedure is the following:
-
remove the tray from the vending machine and rest it
on the workbench;
-
remove the motor and the spiral from the tray (Fig.
126);
-
remove the spiral (Fig. 127);
-
remove the electrical connectors (Fig. 129);
-
replace the motors and carry out the inverse procedure
for assembly.
If you want to replace a motor with a motor driving two
spirals you need to:
-
remove the tray from the vending machine and lean it
on the workbench;
-
remove the motor and the spiral from the tray (Fig.
126);
-
remove the spiral (Fig. 127);
-
if present, remove the dispensing guide (Fig. 128);
-
remove the electrical connectors (Fig. 129);
-
carry out the same procedure for the other spiral;
-
remove the spacer (Fig. 130);
-
fit the snack conveyor (Fig. 131);
-
connect the two electrical connectors (Fig. 132);
Fig. 132
Fig. 130
Fig. 133
-
assemble the right and the left spirals on the double
motor;
-
insert the motor with the spirals in the proper channel
(Fig. 133);
-
fit the tray into the vending machine and adjust the
spirals as indicated in 10.3.1.
Fig. 131
Summary of Contents for D.A. COMBISNACK
Page 67: ...67 English...
Page 68: ...Cod 0875 971 Ed 02 10 03...
