48
English
Beverage selection
If the vending machine has not been programmed to
dispense beverages for free, insert requested credit.
Press the key corresponding to requested beverage.
After beverage dispensing, the message “REMOVE CUP”
is displayed. Take the beverage from the dispensing outlet.
After closing the door the display will show the message
“THANK YOU” and after a few seconds “SAECO combi
SAECO” (vending machine is awaiting selection).
Warning
Not to burn your hands, wait for the signal to say that the
dispensing is over - “REMOVE CUP”- before introducing
it into the outlet.
Do not open the brewing door while the v.m. is brewing
beverages.
In case of failures or product missing during the brewing
phase, the display indicates the causes.
Messages and special warnings are listed in section 11.
9.2
Selection of products
(SNACKS)
The vending machine is able to manage up to 5 trays of 6
spirals each. Each spiral is identified by a
tray and a
spiral
code (see 5.4).
Pressing a numeric key (corresponding to the tray) the first
line of the display shows the message “SELECTION XX”.
The user has 8 seconds to input the second digit. If this
time expires, even first digit will be cancelled.
The requirements to obtain a snack are:
-
the available credit is sufficient or the vending machine
has been set for free operation. If this is not the case,
the display shows the message “INSERT XXX”;
-
no error conditions prevent the operation. On the
contrary the display shows the error message “SNACK
XXX OUT OF SERVICE” alternated with “NOT
AVAILABLE”;
-
the chosen spiral is present. Otherwise the display
shows the message “NOT AVAILABLE”;
-
no error condition for the requested spiral is present.
If this is not the case, the display shows the message
“NOT AVAILABLE”.
Important
During dispensing:
-
payment systems are disabled;
-
it is not possible to dispense hot beverages;
-
the first line on the display shows the programmable
dispensing message (default ‘WAIT FOR PRODUCT’).
Selection of the snack product
There is a label inserted into the lower part of each tray
which shows the code of the product and the corresponding
price.
Insert the amount required.
Select the product via the keys from 1 to 6 and enter the
desired code (23, 42 etc).
After beverage dispensing, the message “THANK YOU”
will appear. Remove the product from the tray. After a few
seconds the message “SAECO combi SAECO” (vending
machine awaiting selection) will appear.
Warning
In case of failures or product missing during the brewing
phase, the display indicates the causes.
Messages and special warnings are listed in section 11.
Important
The instructions for use are shown on the plate on the front
side of the vending machine.
Summary of Contents for D.A. COMBISNACK
Page 67: ...67 English...
Page 68: ...Cod 0875 971 Ed 02 10 03...
