Saeco D.A. COMBISNACK, Use And Maintenance

Page: 66 / 68

66
English
Fig. 138
12 STORAGE - DISPOSAL
12.1 Change of location
Should the vending machine be positioned in another site
you need to:
-
unplug the machine;
- empty the coffee bean hopper, as well as the soluble
and sugar containers;
- empty the snack/bottle trays;
- empty the AIR BREAK device. Slide out the spring from
the right pipe (Fig. 138) and convey the water into a
container. After draining completely the pipe, fit the
spring back into position;
Fig. 139
- carry out the boiler draining cycle (maintenance menu);
- drain the water pipe. Slide out the spring from the left
pipe (Fig. 139) and convey the water into a container.
After draining completely the pipe, fit the spring back
into position;
- turn off the vending machine through switch 15 (Fig.
1);
- empty the coffee grounds bag (see 10.2.3);
- empty the discharge fluid tank and wash it (see 10.2.4);
- clean the vending machine as indicated in section 10;
- reassemble the components and close the doors;
- raise and position the vending machine in the selected
site as indicated at 5.2.
12.2 Inactivity and storage
When the vending machine needs to be stored or remains
inactive for a long period, it is necessary to carry out the
same operations as described in 12.1. So you need to:
- wrap the vending machine with a tarpaulin to protect
it from dust and dampness:
- check that the vending machine is in a suitable place
(the temperature should not be less than 1
°
C) taking
care to not lean any boxes or appliances over it.
12.3 Disposal of the vending
machine
To dispose of the vending machine, it is necessary to
proceed as described in the preceding points.
It is advisable to send the vending machine to the
authorized waste collection center or divide the material
(ferrous materials, plastics, electric wires), dismantling them
separately.
Warning
The diposal of the vending machine or of a part of it must
be carried out with full respect of the environment and
according to local laws in force.