manualshive.com logo in svg

Saeco AULIKA EVO TOP HSC, Operation And Maintenance, Page: 93 / 108

Share
Download
Saeco AULIKA EVO TOP HSC Operation And Maintenance Download Page 93

US English

10

93

If they do not match, proceed as described below:

Ensure that the lever is in contact with the brew group
base.

Make sure that the hook which locks the brew group is in
the correct position. firmly press the "PRESS" button to
check its position.

Insert the brew group into its seat again until it locks into
place WITHOUT pressing the "PRESS" button.

Close the service door.

Ensure

that

the

brew

group is completely dry
before putting it back into
the machine.

10.2.9

Brew Group Cleaning with
the "Coffee Oil Remover"

Besides weekly cleaning, we recommend performing a
cleaning

cycle

with

"Coffee

Oil

Remover"

after

approximately 500 cups of coffee or once a month.

This operation completes the maintenance process for the
brew group.

Both the "Coffee Oil Remover" system used to clean the
brew group and the "Maintenance Kit" may be purchased
at your local dealer or at authorised service centres.

The "Coffee Oil Remover"
system has no descaling
properties. For descaling,
use the Saeco descaling
solution and follow the
procedure described in the
"Descaling" chapter.

The wash cycle cannot be interrupted. Do not leave the
machine unattended during this operation.

Do not drink the solution
dispensed

during

this

procedure. The solution
must be disposed of.

Access the user menu as described in the "Access to the
User Menu" section.

Summary of Contents for AULIKA EVO TOP HSC













































































































Reviews:

No comments