manualshive.com logo in svg

Saeco AULIKA EVO TOP HSC, Operation And Maintenance, Page: 53 / 108

Share
Download
Saeco AULIKA EVO TOP HSC Operation And Maintenance Download Page 53

US English

8

53

MENU ITEM

Description

SET USER PASSWORD

To set the user menu access PASSWORD.
NOTE:
if the PASSWORD is set to (0000), it will not be requested upon access.
If the PASSWORD is forgotten, a restoring procedure must be started. Please contact customer service.

SET TECHNICAL
PASSWORD

To set the technical menu access PASSWORD.
NOTE:
if the PASSWORD is set to (0000), it will not be requested upon access.
If the PASSWORD is forgotten, a restoring procedure must be started. Please contact
customer service.
Warning:
The technical menu password also allows you to access the user menu

Display Menu

With this menu, the menu language and the display brightness and contrast can be set.

Language

This setting allows you to select one of the following 17 user interface languages:
- ITALIAN
- ENGLISH
- GERMAN
- FRENCH
- SPANISH
- PORTUGUESE
- DUTCH
- POLISH
- SWEDISH
- BULGARIAN
- HUNGARIAN
- CZECH
- SLOVENIAN
- ROMANIAN
- GREEK
- RUSSIAN
- KOREAN
The currently selected language is displayed upon accessing the page.
The language can be changed with the correct controls.

BRIGHTNESS

To set the correct display brightness according to room illumination.

Contrast

To set the correct display contrast according to room illumination.

Display Logo

To display the chosen logo during certain stages of machine use:

Standard

The standard logo is displayed.

Bean

Coffee beans are displayed as the logo.

Custom

A customized logo is displayed.
The logo can only be customized using the dedicated tool to be requested to the
manufacturer.

Water Menu

This menu allows the correct water parameters for coffee brewing to be set.

Hardness

To change the machine water hardness setting.
With the "Hardness" function you can adjust your machine to the level of hardness of the
water you use, so that the machine will request descaling at the right time.
Measure water hardness as shown in section "Measuring and Adjusting Water Hardness".

Summary of Contents for AULIKA EVO TOP HSC













































































































Reviews:

No comments