manualshive.com logo in svg

Saeco AULIKA EVO TOP HSC, Operation And Maintenance, Page: 91 / 108

Share
Download
Saeco AULIKA EVO TOP HSC Operation And Maintenance Download Page 91

US English

10

91

The bar shows the washing progress.
Wait until the cycle stops automatically. When the cycle
has been completed, the display shows:

Rinse the water tank and fill it with fresh drinking water.
Press the "OK" button to confirm.

Wash the container used for the solution thoroughly and
fill it with 1/2 (half) litre of fresh drinking water which will
be used for rinsing.

Empty the container placed under the dispensing spout.

Insert the suction hose into the container used. Press the
"OK" button to confirm.

Place an empty container under the dispensing spout and
press the "OK" button to confirm.

The machine performs a Cappuccinatore rinse cycle. The
bar shows the rinsing progress.

Wait until the cycle stops automatically. The machine will
go back to the normal operating cycle.

Wash all the Cappuccinatore parts as described in the
"Cleaning the Cappuccinatore (After Each Use)" section.

It is advisable to remove
the Cappuccinatore from
the machine when not
being used, in order to
keep it clean.

Summary of Contents for AULIKA EVO TOP HSC













































































































Reviews:

No comments