manualshive.com logo in svg

Saeco AULIKA EVO TOP HSC, Operation And Maintenance, Page: 47 / 108

Share
Download
Saeco AULIKA EVO TOP HSC Operation And Maintenance Download Page 47

US English

8

47

8.3.3

Description of Messages in the Technical Menu

MENU ITEM

Description

Settings

This menu allows you to access all machine configuration parameters

Credits Menu

This menu allows you to activate the use of virtual credits, load them onto the machine, reset them and view
them on the "Ready for use" screen

ACTIVATE CREDITS

This menu allows you to enable the system that checks for any virtual credits on the
machine, to prevent the brewing of unwanted products.
This check will not be performed when dispensing hot water, milk or steam

Off

This setting disables the virtual credits checking system

On

This setting enables the virtual credits checking system

Add Credits

This function allows you to load virtual credits onto the machine

Reset Credits

This function allows you to reset all virtual credits on the machine

Show Credits

This function allows the credits to be displayed on the main "Ready for use" page.
NOTE:
The "ACTIVATE CREDITS" setting must be set to "ON", otherwise the machine will not
display the credits, regardless of the selected parameter

Off

To disable credit display.
NOTE:
The machine will always display the number of credits when the minimum level of 30
credits is reached, so that the user can contact the service provider

On

To enable credit display

Beverage Menu

This menu allows you to adjust the characteristic parameters of the beverages dispensed by the machine

CONFIG. BREWING
MODE

This menu allows you to adjust the beverage doses in brewing mode or to save the
desired dose during the dispensing cycle

Espresso

An Espresso will be brewed once the length of the beverage has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH
PARAMETERS" menu

Coffee

A Coffee will be brewed once the length of the beverage has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH
PARAMETERS" menu

Cappuccino

A Cappuccino will be brewed once the length of the coffee part and milk part has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH
PARAMETERS" menu

Latte Macchiato

A Latte Macchiato will be brewed once the length of the coffee part and milk part has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH PARAMETERS"
menu

HOT WATER

Hot water will be dispensed once the length of the beverage has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH
PARAMETERS" menu

milk

Milk will be dispensed once the length of the beverage has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG.  WITH
PARAMETERS" menu

Summary of Contents for AULIKA EVO TOP HSC













































































































Reviews:

No comments