manualshive.com logo in svg

Saeco AULIKA EVO TOP HSC, Operation And Maintenance, Page: 80 / 108

Share
Download
Saeco AULIKA EVO TOP HSC Operation And Maintenance Download Page 80

US English

9

80

Press

the

"DOWN"

button

to

select

the

"MILK

QUANTITY" menu.

Press the "OK" button to enter.

Press the "DOWN" button or the "UP" button to move
the bar and select the desired value; the number on the
side identifies the bar value (in seconds). Then press the
"OK" button to confirm and exit.

Press the "DOWN" button to select the "PAUSE" menu.

Press the "OK" button to enter.

Press the "DOWN" button or the "UP" button to select
the desired value.

Press the "DOWN" button to select the "HIGH SPEED
MILK" menu.

Press the "OK" button to enter.

Press the "DOWN" button or the "UP" button to select
the desired value.

By activating this function,
milk

and

coffee

are

dispensed

at

the

same

time.

Then press the "OK" button to confirm and exit.

When this phase has been completed, the beverage is
programmed. It is recommended to perform a visual check
of the result. To restore the factory settings of a single
beverage, proceed as follows.

Summary of Contents for AULIKA EVO TOP HSC













































































































Reviews:

No comments