SAC SA100, Manual

Page: 219 / 224

SOUTHERN AVIONICS COMPANY
Model SA100 Dual 7-1 Modifications
7 Modifications
7.1 EMI Filter Module
The EMI Filter Module ensures compliance with European Community (EC) standard for the SA
Series Transmitter. FL1 provides line filtering for the AC Mains. FL2 and FL3 provide line
filtering for the DC Mains. FL4 provides filtering for the coupler supply voltage generated within
the transmitter.
Installation
1.Secure the EMI Filter Module to the transmitter enclosure using the supplied hardware.
2.Connect the wires from the EMI Filter Module to the appropriate terminals. See figures “Input/
Output Terminal Blocks,” “EMI Filter Module Schematic,” and “EMI Filter Module Diagram.”
3.Follow the procedures in the “Transmitter Installation” section of the manual with the following
exceptions;
a. Connect AC line and Battery (if used) to 7TB1. See figures “EMI Filter Module Schematic,”
and “EMI Filter Module Diagram.”
b. Connect the RF cable and coupler control cable to TB2. See figures “EMI Filter Module
Schematic,” and “EMI Filter Module Diagram.”