MOVEMENT, in order not to block the collector
channel, and disengage the blades, which will stop
the audible signal.
To empty the grass-catcher,
– press the button (1) which releases the emptying
system, and bring the button back so that it is
held down;
– pull out the lever (2) and lift the grass-catcher;
– close up the grass-catcher so that it hooks onto
the pawl (3).
At times the audible warning
may be heard when the blades are engaged
even when the grass-catcher has been emptied.
This is due to grass cuttings left on the sensor of
the micro-switch. To stop the signal, disengage
the blades and then immediately engage them
again.
Always keep the sensor (4) free of grass-cuttings.
Summary of the conditions whereby the safety devices permit or stop work
The safety devices work in two ways:
– by preventing the engine from starting if all the safety requirements have not
been met;
– stopping the engine if even just one of the safety requirements is lacking.
To start the engine it will be necessary that:
– the transmission is in “neutral”;
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in “neutral”;
– the operator leaves his seat with the transmission in “neutral” but without enga-
ging the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged
The table below shows various operating conditions,
highlighting
why the safety
device shuts down the engine.
NOTE
eng 23
HOW TO USE THE MACHINE
2
1
3
4
